|
ZonePod can accommodate an extensive range
of sensor options to fulfil a whole host of
monitoring requirements. Apart from setting
high and low alarm thresholds for the temperature
and humidity sensors no additional configuration
is required.
The sensors are supplied with an interface
cable of 0.2m or 5m and additional extender
cable lengths are also available.
Typical Applications
Temperature monitoring in computer rooms
to provide early warning of air conditioning
failure.
Smoke monitoring in all kinds of environments
where 24-hour notification is required.
Leak detection in retail outlets, restaurants
etc where an overnight leak could have
a catastrophic effect.
Power monitoring where standby power is
available but knowledge is required regarding
when power failures occur, and duration
of outages.
Humidity monitoring where condensation
can seriously affect the operation of
electronic equipment.
ZonePod Specifications
Available Sensors:
|
Temperature |
|
Power |
|
Humidity |
|
Security |
|
Smoke |
|
Universal |
|
Water leak detection |
|
|
Thresholds
High / Low thresholds configurable
on temperature and humidity sensors.
Open / Closed configuration option for
all other sensors (auto set-up for sensors
other than the universal sensor)
Configuration
Direct configuration via 5-button
keypad and screen
Monitoring
On screen monitoring (either through
sensor type or sensor reading, user configurable)
Alerts
Via voice or SMS messaging. 4 programmable
messages along with a common message.
Ports 1, 2 and 3 have individual messages
and 4, 5 and 6 use a group message.
LEDs
Green and red for each port. The following
factors apply:
| Green
LED |
Red
LED |
Meaning |
|
| Off |
Off |
No
sensor |
| On |
Off |
Sensor
Normal |
| Off |
On |
Sensor
Low |
| On |
On |
Sensor
high/ alarm |
|
Dimensions (mm) 279 (H0
x 197 (W) x 40 (D)
ZonePod Key Features
- Monitors up to 6 environmental
sensors in any combination
- Wide range of sensors including temperature,
humidity, smoke, water leak, power,
security, air conditioning, fire panel,
etc
- Voice message and SMS text alerts
can automatically be sent to up to
10 recipients when an alarm occurs.
- 4 types of alarm message can detail
site location and specific alarm information
(user configurable)
- Integrated LCD display show sensor
types connected and status
- “Alarm” and “Normal”
status LEDs for each sensor
- Uses standard telephone line
- Password protection for alert facility
- Alarm restored messages to notify
that conditions have returned to normal
- Automatic line status reporting.
- High / Low user configurable warning
thresholds for temperature and Humidity
- Easy to use on-board menu facility
for out-of-the-box operation
- Dialler override facility to disable
voice and text alerts when required
- Different alarm types sent to different
personnel
- Alarm event history log
- Remote dial-in facility to “listen
in” to most recent alarm messages
Step 1: Plug-in sensors to ZonePod
Step 2: Configure required thresholds
for temperature / humidity sensors (if
used)
Step 3: Record alarm messages and
input required detail for text messages
Step 4: Input required telephone
numbers
Step 5: Connect ZonePod
to telephone line
Step 6: Turn dialler override off
ZonePod can be wall-mounted using
the cutout slots on the rear of the unit.
Individual alarm messages can be configured
for sensor ports 1, 2, 3 and a “group”
message for ports 4, 5, and 6.
The versatility of ZonePod means
that in effect it can be used in a wide
variety of environments. Sensors can be
connected in any combination for maximum
flexibility. This makes it a perfect solution
for both small and large organisations
alike.
|
